Instruction manual

7
3.3. Connecting the AC Adapter (only for Standard PC10 meter)
The AC adapter is not included with your meter; order separately. See the “Accessories”
section on pages 23 - 24.
1. Insert the AC jack as shown in Figure 7 below.
2. Switch off the meter before plugging the adapter into the power source. This safety
precaution protects the software in your meter.
3. Press the ON/OFF button to switch meter on.
Figure 7 - Using AC adapter (only for Standard PC 10 meter)
Fi
g
ure 6 - Probe Connector
pH/Conductivity/°C Meter