User Guide

Instruction Manual CyberScan DO5000

9 DATA MANAGEMENT

Your CyberScan DO 5000 meter is equipped with an RS-232 port for

sending measurement data to a printer. The printer must be capable

of receiving data within the following guidelines.

Baud rates 110 to 38400 bps

Data Bits 7 or 8

Parity even, odd or none

Stop Bits 1 or 2

The meter and the external device must be configured to match with

respect to these parameters.

A shielded RS-232 cable must be used. The RS-232 connector on

the back panel of the meter is a female DB9 style. Is the external

device has a 25 pin connector, an adapter is required. The meter’s

pin configuration is:

Description

1 Buffers analog copy of input

2 Send data from meter

3 Receive data to meter

5 Signal Common

9 Signal Common

To initiate printing, touch print if in the manual print mode, or set the

print interval for stable readings or at a timed interval. Refer to the

Setup sections, Set Print Interval and Set Print Criteria.