User Guide

Instruction Manual CyberScan DO5000

Here you can set the display resolution on the screen. Choose high

for two decimal points in mg/L, and for one decimal point in % sat and

mbar. Choose low for one decimal point in mg/L and one unit

resolution in % sat and mbar.

To Set Display Resolution

1. Access the Set Display resolution screen from the DO/ BOD/

OUR/ SOUR Setup screen.

2. The current Display Resolution is displayed on the screen.

3. Touch high or low to select the desired resolution.

4. Touch enter to accept this choice and return to the Setup screen.

Touch exit to return to the Setup screen, without making any

changes.