User Guide

Instruction Manual CyberScan DO5000
41
5.3 Select Calibration Mode
This mode permits a choice between automatic and manual
standardization. In most case, automatic calibration is preferred.
However, if the standard is not saturated and the oxygen
concentration is known, (by titration, for example), manual calibration
offers the user capability of entering the known oxygen concentration
via a numeric keypad.
1. Access the Select Standardization Mode from the Setup screen.
The current mode is shown on the screen.
2. Touch AUTO or MAN to choose the desired mode.
3. Touch enter to accept the choice and return to the setup screen.
Current MODE
Select D.O. Calibration Mode
enter
AUTO
MAN