User Guide

TABLE OF CONTENTS
1. INTRODUCTION 1
2. GETTING STARTED 2
2.1. Connectors 2
3. USING THE METER 3
3.1. The Electrode 3
3.2. Display/ Keys 4
3.3. Screen Display 4
3.3. Screen Display 5
4. SETUP PROCEDURE CHECK 6
4.1. CyberScan DO 1500 Setup Pages 6
4.1.1. Setup P 1.0: View the Calibration Data 8
4.1.2. Setup P 2.0: Set Pressure 11
4.1.3. Setup P3.0: Set the Salinity Value 13
4.1.4. Setup P4.0: Select Number of User Cal Points for %Sat calibration 15
4.1.5. Setup P5.0: Enable/ Disable Auto Cal 17
4.1.6. Setup P6.0: Select the Temperature Unit 19
4.1.7. Setup P7.0: Enable/ Disable Stability Indicator 21
4.1.8. Setup P8.0: Baud Rate 23
4.1.9. Setup P9.0: Parity Bit 25
4.1.10. Setup P10.0: Stop Bit 27
4.1.11. Setup P11.0: Print Data 29
4.1.12. P12.0: Clear Stored Data 31
4.1.13. P13.0: Clear Buffer Values 33
5. USER CALIBRATION 35
5.1. %Sat – One Point calibration (Auto) 35
5.2. %Sat – Two Point calibration (Auto) 36
5.3. %Sat – One Point calibration (Manual) 37
5.4. mg/L– One Point calibration (Auto) 38
5.5. mg/L– One Point calibration (Manual) 39
5.6. ATC Calibration 40
6. MEMORY 41
6.1. Store Value into Memory 41
6.2. Recall Value from Memory 41
7. PRINT DATA 42
7.1. Printing Data 42
8. DO THEORY 43
9. METER SPECIFICATIONS 44
10. CLEANING 45
11. TROUBLESHOOTING 45
12. ACCESSORIES 46
12.1. Replacement Meters and Accessories 46
12.2. Dissolved Oxygen / BOD Electrode 46
13. WARRANTY 47
14. NOTICE OF COMPLIANCE 48