Specifications

Accessories
Calibration Sachets (20 x 20 ml Per Box)
Economical NIST-traceable sachets for quick, accurate and convenient calibrations. Simply insert
electrode into sachet pack, calibrate, rinse and discard sachet – no separate container needed!
Order Code Part No. Description
pH Buer Sachets (20 x 20 ml Per Box)
ECBU4BS 01X223102 pH 4.01 buer sachets (NIST traceable)
ECBU7BS 01X223101 pH 7.00 buer sachets (NIST traceable)
ECBU10BS 01X223103 pH 10.01 buer sachets (NIST traceable)
ECRINWT 01X223201 pH deionized water rinse sachets (NIST traceable)
Conductivity/Salinity Sachets (20 x 20 ml Per Box)
ECCON10BS 01X219905 10 µS/cm KCl Conductivity sachets
ECCON447BS 01X219902 447 µS/cm KCl Conductivity sachets
ECCON1413BS 01X219901 1413 µS/cm KCl Conductivity sachets
ECCON2764BS 01X219903 2764 µS/cm KCl Conductivity sachets
ECCON15000BS 01X219904 15000 uS/cm KCl Conductivity sachets
ECCON3000BS 01X219906 3000 ppm KCL Salinity calibration sachets
Buffer Tablets (Box of 100 Tablets) – For Use with Testers Only
These buffer tablets are perfect for small volumes of pH buffers needed for calibration of pocket pH
testers. Simply dissolve a tablet in 30 ml of fresh distilled water; calibrates up to ±0.1 pH accuracy.
Order Code Part No. Description
pH Buer Tablets (10 Strips x 10 Tablets Per Box)
ECBU4BX 01X038201 pH 4 buer tablets
ECBU7BX 01X038202 pH 7 buer tablets
ECBU10BX 01X038203 pH 10 buer tablets
Precision pH Simulator
The Eutech pH-millivolt simulator is a handy, easy-to-use service tool for testing the accuracy of your
pH meter. Used for trouble-shooting and fault diagnosis of meters, the simulator works with most
pH/redox instruments with BNC connectors. Simulator comes with a BNC cable and a sturdy rubber
boot which doubles up as a stand.
• Push button pH/mV selection
• pH accuracy of ±0.05; mV range of ±2
• USA/NIST pH buffer standards simulation
• 16 combination values
• 1 GΩ high input impedance test
• Large display with bright LED
• Splashproof keypad
• Protective rubber boot doubles up as stand
• Power-saving meter runs on 4 ‘AAA’ x 1.4 V batteries
Order Code Part No. Description
ECPHSIMULATOR 01X373301
Precision hi-low impedence and multiple buer pH simulator
(with BNC-BNC cable provided)
page | 91