Instruction manual

Instruction Manual PC 510

8.4.4 P3.4 Selecting

C or

This meter lets you select between °C and °F units for temperature readings.

From measurement mode

1. Press the MODE key to select pH measurement mode.

2. Press SETUP key to enter Setup MODE.

3. Press the  or  key to scroll through sub-groups until you view

parameter P3.0.

4. Press the ENTER key four times to select parameter P3.4.

5. Press the  or  key to toggle between °C and °F.

6. Press the ENTER key to confirm selection and to return to the sub-

group menu. Press the CAL/MEAS key to return to measurement

mode.

NOTE

: You can switch between

C and

F in Program P7.2 (available

from conductivity or TDS mode). If you switch between

C and

F in pH

mode, the meter will also switch in conductivity or TDS mode.

Figure 31: P3.4- Select

temperature units

SETUP

p 3.4

°C

SETUP

p 3.4

°F