Instruction manual

Instruction Manual PC 510
24
SETUP in TDS Measurement Mode
P5.0: View previous calibration data
P5.1 First range calibration point (0.00 – 9.99 ppm)
P5.2 Second range calibration point (0.0 – 99.9 ppm)
P5.3 Third range calibration point (0 – 999 ppm)
P5.4 Fourth range calibration point (0.00 – 9.99 ppt)
P5.5 Fifth range calibration point (0.0 – 200 ppt)
P6.0: View electrode data
P6.1 Effective cell constant for first range (0.00 – 9.99 ppm)
P6.2 Effective cell constant for second range (0.0 – 99.9 ppm)
P6.3 Effective cell constant for third range (0 – 999 ppm)
P6.4 Effective cell constant for fourth range (0.00 – 9.99 ppt)
P6.5 Effective cell constant for fifth range (0.0 – 200 ppt)
P7.0: Unit configuration
P7.1 READY indicator and auto endpoint function – select on or off
P7.2 Select °C or °F
P7.3 Select Automatic or Manual Temperature Compensation
P7.4 Setting TDS conversion factor.
P8.0: Temperature
P8.1 Adjusting temperature coefficient
P8.2 Adjusting normalisation temperature
P9.0: Reset to factory defaults
P9.0 Reset meter to factory defaults.
mS
S
ppt
ppm
µ
SETUP
CAL
P 5.0
mS
S
ppt
ppm
µ
SETUP
ELE
P 6.0
mS
S
ppt
ppm
µ
SETUP
COF
P 7.0
SETUP
P 8.0
°C °F
mS
S
ppt
ppm
µ
SETUP MEAS
P 9.0
mS
S
ppt
ppm
µ