Instruction manual

Instruction Manual PC 510
19
Manual-ranging
The manual ranging function lets you select the specific range you want to work in. Refer to page 9 for
the table of range.
1. To select the desired measuring range manually, press the RANGE
key while in measurement mode. The meter will lock on to the
appropriate range and the “MEAS” indicator blinks.
2. Press RANGE key again (if needed) until desired range is selected.
3. To re-select the Auto-ranging function, repeatedly press the RANGE
key until the “MEAS” indicator appears without blinking.
NOTES
:
The meter will not let you manually select a range in which the reading will be over-range.
The meter resets to the Auto-ranging function once it is turned off. You will have to reset the manual
ranging function each time you turn the meter off.
Figure 22: Manual ranging
MEAS
READY
1413
ATC
°C
22.3
µ S
READY
MEAS
1413
ATC
°C
22.3
µ S
MEAS
1999
ATC
°C
µ S
E
N
T
E
R
R
A
N
G
E