User Guide

2
2 DISPLAY AND KEYPAD FUNCTIONS
2.1 Display
The LCD has a primary and secondary display. The primary display shows the measured
conductivity or TDS reading. The secondary display shows the measured temperature. The
display also shows error messages, keypad functions and program functions. See Figure 1.
1. HOLD indicator 9. Temperature coefficient in % 16. CONDuctivity mode indicator
2. SETup mode indicator 10. Temperature indicator 17. Low battery indicator
3. AUTO indicator 11. Automatic Temperature
Compensation indicator
18. Index number of the memory
recalled or stored (except CON 10)
4. MEASurement mode indicator 12. TEMPerature mode indicator 19. MEMory recall mode indicator
(except CON 10)
5. CALibration indicator 13. TDS mode indicator 20. ERRor indicator
6. parts per thousand or parts per million
indicator (for CON 10 & 200 meters
only)
14. ON/OFF indicator - option is
turned on
21. Printer indicator (for CON 200
only)
7.milligrams per liter or grams per liter
indicator (for CON 10 & 200 meters
only)
15. ON/OFF indicator - option is
turned off
22. READY indicator
8. microsiemens or millisiemens indicator
Fi
g
ure 1: Full LCD Screen