User Guide

44
9.3 Running CyberComm Portable
Before running the CyberComm Portable program, please ensure that the RS232 cable is
connected between the computer’s serial port and the meter’s port.
A 1-meter RS232 cable, 9-pin male to 9-pin female connector (order no. EC-CA01M09F09) is
supplied with the CyberScan CON 200 meter.
For additional information on the connection, please refer to section 3.5 “Connecting the
RS232C cable (only for CyberScan Con 200)”.
Figure 47: Run the CyberComm Software program