User Guide

Instruction Manual CyberComm pH 1000/ pH 2500

5 PRINT READINGS

5.1 Printing using a serial printer

Connect the pH 1000/ 2500 meter to the serial printer via RS232C cable (refer to the list of accessories).

The configuration of the RS232C port is as shown below.

Pin Number Description

1 -

2 Transmit Data

3 Receive Data

4 DSR (Data Send Ready)

5 GND (Ground)

6 -

7 -

8 RTS (Request to Send)

9 -

5.2 Setting up the Printer

If the printer has a 25-pin connector, a 25-pin to 9-pin converter will have to be used. Use the following

configuration:

Pin of Meter Pin Number of Printer

2 (TXD) 3 (RXD)

4 (DSR) 20 (DTR)

5 (GND) 7 (GND)

5.3 Connecting the Cable to the Computer

a) If the computer has a 9-pin connector, insert the cable (EC-CA01M09F09) provided into the socket of

the computer, taking note of the gender of the two connectors.

b) If the computer has a 25-pin connector, use a 9-pin to 25-pin, male/ female converter with 9 pins and 25

holes for connection. This converter can be obtained from any computer store.