Instruction manual

Instruction Manual CyberScan DO 110
3
2.2 Keypad
A large membrane keypad makes the instrument easy to use. Some buttons have
several functions depending on its mode of operation.
KEY
FUNCTION
OFF
ON
• ON/OFF - Powers on and shuts off the meter. The meter will start in a
measurement mode similar to the last measurement mode it is in before
being switched off.
• CAL - Activates the DO % Saturation or mg/l calibration mode and when
used with the MODE key, it activates the temperature calibration mode.
• MEAS - Allows return to measurement mode when canceling or terminating
any operation.
• HOLD - Activates/Deactivates freezing of the measured reading while in
measurement mode.
• ENTER - Confirms the calibration values in Calibration mode and the
selection in SETUP and Print Function mode.
Scroll through the memory location and the stored data during memory
recall.
MI
MR
• MI (Memory Input) - Captures the measured readings with its
corresponding temperature values and stores them in the memory.
• MR (Memory Recall) - Retrieves the stored data from memory.
• ▲▼ - Sets the calibration values during mg/l or temperature calibration.
Scrolls through each SETUP and its sub group menu.
Scroll through Print Function menu and its parameters.
SETUP
• SETUP - Activates the parameter setting menu to allow you to customise
meter configuration, view calibration point and electrode data, select
auto power off, reset meter, clear memory, set % Saturation Offset and
set dissolved oxygen parameters. .
MODE
• MODE - Selects the measurement parameter option between % Saturation
with temperature and mg/L (or ppm) with temperature.
• PRINT - Allows print of current measurement or stored data to either the
printer or the computer.
ENTER
HOLD
MEAS
CAL