Instruction manual

Instruction Manual CyberScan DO 110
43
Figure 41: Communication Settings for computer's Com port. It must match with COM port settings on
CyberScan DO 110 meter. Please refer to Section 7.1 Using DO 110 Meter With Printer or Computer on
page 15 for the settings.
iii. Communication Settings
• Connect Using - For selecting communication port. (Select ‘1’)
• Baud Rate – For selecting baud rate. (Select ‘9600’ bps (bits per second)).
• Parity – For selecting parity. (Select ‘None’)
• Stop Bits – For selecting stop bits. (Select ‘1’).
Figure 42: Under SAVE AS menu, you can save your data as *.dat or *.txt formats