Instruction manual

Instruction Manual CyberScan DO 110
42
i. Buttons & Check-Box
• Enable Connection - Click this button to enable communication between meter
and computer.
• Clear Readings - To clear all data and start all over again.
• Save Readings - To save all data displayed in either *.dat or *.txt format.
• Time Stamp - To include Time and Date stamp when collecting the data. Time
and date information comes from the computer.
Figure 40: Under File Menu setting, you can change various parameters. Under ABOUT menu, details of
Eutech Instruments' contact information, email address and updates are shown.
ii. Menu
• Communication Settings - To set communication port number, baud rate
speed, parity and stop bits protocol.
• Open - To open previously saved data file.
• Save - To save current data captured.
• Save As - To save current data set in another format such as *.dat or *.txt.
• Exit - To exit from CyberComm Data Acquisition Software program.