Instruction manual

Instruction Manual CyberScan CON 1500
54
Depending on which temperature probe is connected (4-cell/ 2-cell
temperature probe), user can adjust the temperature value using the
/save or /view keys. [Window: ± 5°C (9°F)]
If no probe is connected, user can adjust the default temperature
value.
2. Press /save or /view keys to adjust the temperature.
3. Press enter to confirm the reading and return to measurement
mode
OR
4. Press std key to exit from this setup page.
Note:
ATC: Maximum adjustable temperature offset is ±5.0°C/ 9.0°F.
MTC: Maximum adjustable temperature settings is -5.0°C to 105.0°C
(23.0°F to 221.0°C).