Instruction manual

Instruction Manual CyberScan CON 1500
33
4.2.12 Setup Page 11.0: Set the Stop Bit
This setup page allows you to set the stop bit of the communication
protocol interface.
To Set Stop Bit
1. Access the Set Stop Bit setup page from any measurement mode
screen by pressing the setup key.
2. Use the ▲/save or ▼/view keys to scroll until the screen display
as shown.
save

view



 pr ess to set val ue
press to accept
enter
Print


press to set value
press to accept
 
enter
Print