User Guide

38
11 ERROR MESSAGES AND PROMPTS
11.1 Communication Error
This error message appears when
a) An incompatible meter is connected
b) RS232 Cable is not connected
c) Mismatch in the communication settings
d) Meter not in measurement mode.
Figure 40: Communication Error
11.2 Print Configuration Settings Error
Meter’s print configuration’s serial output must be set at DATA. DATA is set as default for the CyberComm
5000.
Figure 41: Print Configuration Error
11.3 No Model Detected
This error message appears when an incompatible instrument is connected to the computer.
Figure 42: No model detected
11.4 Save Settings
Screen prompts to save the current settings or not.
Figure 43: Save Settings