Product guide
4
THERMOCOUPLE ▼
Temp 100 Dual-Input
Thermocouple Thermometer
One meter, two inputs—great for differential testing
Differential temperature mode
▼
Multidata LCD simultaneously
indicates each probe along with the
differential reading
Standard miniconnector accepts
four thermocouple types
▼
Use with many widely available
probes or order from our selection
Store and recall up to 1000 data points
▼
Track critical data, spot trends, or
review data at your convenience
All push-button operation
▼
For fast, easy use
Menu driven setup and operation
▼
Detailed on-screen information makes
the Temp 100 easy to use
°C/°F selectable
Minimum and maximum temperature
display
▼
Displays highest/lowest temperature
since meter was switched on, or use
Min/Max Hold Mode to continuously
update lowest/highest temperature
Temperature offset calibration
adjustment
▼
Push-button adjustment for
fine-tuning factory calibration
Hold function
▼
Freezes measurements for
convenient reading and recording
Auto-off function
▼
Turns off meter after 17 minutes of
nonuse to save batteries
Sealed keypad and ABS plastic case;
optional rubber armor
▼
Meet IP54 standards for splash
resistance; armor adds protection and
features a built-in stand
Specifications
Mode Range
Type J
–346 to 2192°F (–210 to 1200°C)
Type T
–418 to 752°F (–250 to 400°C)
Type E
–418 to 1832°F (–250 to 1000°C)
Type K
–418 to 2501°F (–250 to 1372°C)
Select a probe to match
your application
See pages 8–13 to see our wide
selection of probes.
Ordering Information
Catalog number Description Included
WD-35427-40
Temp 100 Meter and batteries
WD-35427-80
Rubber armor Rubber armor with built-in meter stand
WD-35427-85
Hands-free kit Multipurpose hanging strap and mounting magnets
Resolution: 0.1°F/°C between –99.9 to 999.9°,
1° below –99.9° and above 999.9°
Accuracy
Below –148°F (–99.9°C): ±0.25% of reading ±2 °F (±1°C)
Above –148°F (–99.9°C): ±0.1% of reading ±0.7°F (±0.4°C)
Datalogging: 1000 points
Display: 4-digit LCD, 2
1
⁄4" x 1
1
⁄2" backlit viewing area
Digital output: USB
Power: three AA batteries (included)
Battery life: 400 hours continuous (without the use
of backlighting)
Probe: one thermocouple; use any J, K, T, or E probe with
miniconnector (not included)
Dimensions: 4"W x 7"H x 2"D (18 x 10.2 x 5.2 cm)
(with protective boot)
Weight: 1.25 lb (0.6 kg)
Optional rubber armor lets you prop meter
on your lab bench.
35427-40
sales@novatech-usa.com
CALL Toll Free: 1-866-433-6682 or 1-281-359-8538
www.novatech-usa.com
FAX Toll Free: 1-866-433-6684 or 1-281-359-0084