Product guide

29
...setting the standard again and again
®
▼ DATALOGGING
Datalogger shown in cradle;
use cradle as shown or wall
mount.
LoggerPlus Wireless
Transmitting Systems
External Sensors log temperature, mA, voltage, pH, or activation
of a contact closure. See page 28 for further specifications.
Accessories
WD-35710-30 Antenna helps to strengthen reception
WD-35710-69 USB communication cable
WD-35710-63 Replacement cradle AC adapter, 110 VAC
WD-35710-64 Cradle AC adapter, 220 VAC
WD-35710-67 Replacement serial communications cable
WD-35710-80 Replacement receiver AC adapter, 110 VAC
WD-35710-61 Receiver AC adapter, 220 VAC
Specifications & Ordering Information for Dataloggers
Memory: 16,000 data points
Sampling rate: selectable via software from once per 10 seconds to two hours
Power: 3.6 V lithium battery (included)
Dimensions: 1"D x 2
3
⁄4" dia
See page 28 for further specifications.
C
Receiver
35710-25
Remote real-time monitoring of up to
200 dataloggers on one computer
Computer can receive data from loggers
up to 400 feet (120 meters) away!
LoggerPlus cradle
▼
Transforms your logger into a wireless
(RF) transmitter
LoggerPlus receiver
▼
A small RF device that connects to your PC
to receive wireless data from your loggers
A
TempLog and RH/TempLog Dataloggers
These loggers store up to 16,000 measurements at selectable
intervals. The LCD displays current conditions. Choose from
measuring temperature, temperature and humidity, or one of
many processes by choosing an optional external sensor (see
below right).
Note: Sensors must be used with datalogger cradle (“B” below)
and AC adapter in order for data to be transmitted to computer
monitoring station.
B
Datalogger Cradle
The datalogger cradle serves as a mount and wireless transmitter
for the dataloggers. Each cradle can send a signal up to 400 ft
(125 m) outdoors, or 125 ft (40 m) indoors and is tagged with an
ID number. Cradle transmits data at user-set intervals in different
time slots according to the ID numbers in order to prevent data
collision between two or more cradles. Cradle features audible
alarm and serial communication. Note: One cradle is required for
each datalogger used.
What’s included: one 3.6 V lithium battery and 110 VAC adapter.
Each cradle has one port for optional external sensor.
C
Wireless (RF) Receiver and Software
Wireless receiver connects to monitoring station PC with range
of 400 ft (125 m) outdoors, or 125 ft (40 m) indoors. MicroLab
Plus
™
software serves as a color-coded interface showing the
status of up to 200 loggers total, six on one screen. Use it to store
data or set up logger ID, alarm levels, or sampling rate (once per
minute to once per hour). Display temperature, humidity, and low
battery—easy-to-read graphics let you know if any logger is in
alarm condition or not.
What’s included: MicroLab Plus software, serial communications
cable (purchase optional USB communication cable separately
below), and one 110 VAC adapter.
Send data from up to 200
loggers to one computer!
B
Cradle
35710-20
A
35710-10
A
35710-00
Catalog number Description
WD-35710-00
TempLog datalogger
WD-35710-10
RH/TempLog datalogger
Catalog number Description
WD-35710-35
Wireless (RF) receiver and software
Catalog number Description
WD-35710-20
Datalogger cradle
Catalog number Description
WD-35710-70
Temperature probe, –60 to 212°F; 3
1
⁄4"L x
1
⁄4" dia; 6-ft cable
WD-35710-72
Current sensor, 0 to 20 mA
WD-35710-74
Voltage sensor, 0 to 10 V
WD-35710-76
Contact closure sensor, open/close
WD-35710-78
pH adapter, 0 to 14 pH. pH electrode with BNC required
Required System Components
A
Datalogger (up to 200 on one
computer)
B
Cradle (up to 200 on one
computer)
C
Wireless receiver and software
[e-mail]
CALL Toll Free: 1-866-433-6682 or 1-281-359-8538
www.novatech-usa.com
FAX Toll Free: 1-866-433-6684 or 1-281-359-0084