Product guide

18
rtd ▼
0.156 " dia
10" or 18"
RTD Probes
Provide excellent accuracy, stability, and repeatability
Use our RTD probes to measure
temperature when accuracy is important.
All probes include a 5-ft PVC coiled
cord with strain relief that protects from
repeated flexing and tugging. Ergonomic,
easy-grip 5" long glass-filled nylon handle
provides maximum heat insulation and
impact resistance. Fingerstops on handle
prevent probe from rolling and fingers
from sliding when inserting probe into
hard materials.
The 316 stainless steel sheath (tip
casing) provides durability, strength, and
maximum abrasion resistance. Rugged
three-pin circular connector with positive-
locking tab prevents loose connections.
Compatible with all Oakton and Acorn
®
RTD thermometers.
Nylon handle
Three-pin connector
Specifications & Ordering Information
A
General-Purpose: Designed for
most common and liquid immersion
applications.
B
Penetration: Pointed tip style for
penetration into hard and semi-solid
materials. Sturdy stainless steel tip casing
prevents tip from bending when inserting.
C
Surface: Flat sensor wires are encased
in hardened MgO ceramic insulation
to ensure positive contact even under
vibrating circumstances and extreme
conditions.
D
Air/Gas: Perforated shield allows air
and other gases to flow into sensor for
quick readings. Metal shield also absorbs
radiated heat and minimizes sensor error.
E
FEP-Coated: Same as our general-
purpose tip, but this tip has a FEP coating
over the tip casing for use with acids and
strong chemicals.
F
Small Diameter: Same as our
general-purpose tip, but this probe has a
1
⁄8" diameter tip for insertion into soft and
semisoft materials.
G
Smallest Diameter Wedge: Small
diameter angled tip with point can be
wedged into tight areas and minimizes
damage to samples.
H
Alligator Clip: Clips onto objects up to
3
⁄8" thick. The 10-ft, 304 stainless steel
flexible braid over fiberglass cable has no
handle.
0.188 " dia
4"
0.250 "
dia
1.6" 6.5"
10" or 18"
0.125 " dia
10"
0.145 " dia
2"
0.093 " dia
Key Catalog number Temperature range Tip length Dimensions
A
WD-08117-70
WD-08117-72
–58 to 932°F (–50 to 500°C)
10"
18"
B
WD-08117-85
–58 to 932°F (–50 to 500°C) 4"
C
WD-08117-75
–58 to 932°F (–50 to 500°C) 8"
D
WD-08117-90
–58 to 932°F (–50 to 500°C) 10"
E
WD-08117-87
–50 to 500°F (–50 to 260°C) 10"
F
WD-08117-73
WD-08117-74
–58 to 932°F (–50 to 500°C)
10"
18"
G
WD-08117-80
–58 to 932°F (–50 to 500°C) 2"
H
WD-08117-89
–58 to 932°F (–50 to 500°C) 1.5"
0.38 "
1.39"
WD-17002-04 NIST-traceable certificate for RTD
system (meter + probe) with test data calibrated at
four temperature test points
WD-17001-04 NIST-traceable certificate for RTD probe
0.188 " dia
10"
0.250 " dia
[e-mail]
CALL Toll Free: 1-866-433-6682 or 1-281-359-8538
www.novatech-usa.com
FAX Toll Free: 1-866-433-6684 or 1-281-359-0084