Product guide

9
...setting the standard again and again
®
▼ THERMOCOUPLE
0.093" dia tip
0.5"
Tip length (5", 12", or 24")
4.5"
0.155" dia
1.25"
0.75" dia
Catalog number Type Temperature range Features Tip length Dimensions*
Standard probes
WD-08517-55
J –310 to 1400°F (–190 to 760°C)
Junction: grounded
Response time: 15 sec (liquids)
316 SS sheath; nylon handle
5"
WD-08516-55
K –418 to 1650°F (–250 to 899°C)
WD-08500-55
T –418 to 752°F (–250 to 400°C)
WD-93756-03
J –310 to 1400°F (–190 to 760°C) 12"
WD-93756-23
K –418 to 1650°F (–250 to 899°C)
WD-93756-63
T –418 to 752°F (–250 to 400°C)
WD-93756-04
J –310 to 1400°F (–190 to 760°C) 24"
WD-93756-24
K –418 to 1650°F (–250 to 899°C)
WD-93756-44
T –418 to 752°F (–250 to 400°C)
Low-cost probes
WD-08439-60
J –310 to 1400°F (–190 to 760°C) Junction: grounded 4.5"
WD-08439-62
K –418 to 1650°F (–250 to 899°C) Response time: 30 sec (liquids)
WD-08439-64
T –418 to 752°F (–250 to 400°C) 304 SS sheath; PVC short handle
Small-diameter standard probes
WD-08505-55
J –310 to 1300°F (–190 to 704°C) Junction: grounded 4"
WD-08505-56
K –418 to 1500°F (–250 to 816°C) Response time: 10 sec
WD-08505-57
T –418 to 650°F (–250 to 343°C) 316 SS sheath; nylon handle
All stainless steel probes
WD-93600-02
J –310 to 1400°F (–190 to 760°C) Junction: grounded 8"
WD-93600-22
K –418 to 1650°F (–250 to 899°C) Response time: 30 sec
WD-93600-42
T –418 to 752°F (–250 to 400°C) 316 SS sheath; 316 SS handle
4"
0.063" dia
Miniconnector
General-purpose probe
08516-55
Specifications & Ordering Information
*Overall probe sheath lengths may vary up to ±0.25".
Standard nylon handle
Ensure the accuracy of your thermocouple probe,
meter, or system!
Calibration to a NIST-traceable standard helps you meet
ISO, FDA, USDA, and EPA guidelines. Our A2LA-accredited
metrology laboratory will pretest and calibrate your
thermocouple equipment. Service includes NIST-traceable
calibration certificate with before and after test data at
four temperature test points. See pages 30–31 for ordering
information.
8"
0.125" dia
SS handle
General-Purpose Probes
Stainless steel sheaths provide good
chemical resistance and fast thermal response
These thermocouple probes were designed to measure any general-purpose
or liquid immersion application. All thermocouple probes include a 5-ft PVC
coiled cord with strain relief that protects from repeated flexing and tugging.
Ergonomic, easy-grip 5"L glass-filled nylon handle (unless noted below)
provides maximum heat insulation and impact resistance. Fingerstops on
handle prevent probe from rolling and fingers from sliding when inserting
probe into hard materials.
The 316 stainless steel sheath (shaft casing) provides durability, strength,
and maximum abrasion resistance. Rugged thermoset plastic miniconnector
is compatible with all Oakton and Acorn
®
thermocouple thermometers.
Connectors and coiled cord are color-coded based on type:
type J black, type K yellow, and type T blue.
[e-mail]
CALL Toll Free: 1-866-433-6682 or 1-281-359-8538
www.novatech-usa.com
FAX Toll Free: 1-866-433-6684 or 1-281-359-0084