User Guide

14
ATC OFF : If a PT 100 is not used,
then the ATC should be set to
OFF. In step 3 above, choose by
pressing ▲ and ▼ keys to select
ATC OFF. Then press ENTER.
The display will now show the
default of 25
o
C or the last set
value (blinking). Use ▲ and ▼ keys
to set your desired value. Press
ENTER to confirm and the display
shows “CAL” “Con”.
Note : For ATC OFF, you can
adjust the set temperature values
from 0.0 to 99.9
o
C. This value will
be used for its temperature
compensation e.g. pH in the MTC
mode.
SETUP
MODE
ENTE
R
A
tc
SETUP
MODE
ENTE
R
OFF
SETUP
MODE
ENTE
R
25.0