User`s manual

networks
has failed.
Disable Radio
Tick this check box to disable the connection function of this
wireless card.
Fragmentation
Threshold
Set the value for the fragmentation threshold. The default value
is 2346.
RTS Threshold
Set the value for the RTS threshold. The default value is 2347.
Frequency
Choose the wireless frequency for this card.
Ad-hoc Channel
Choose one channel. This must match the channel set in the AP.
Power Save Mode
To save power, you can choose Max Save or Fast Save. The
default setting is Disable.
MaxSave – This can save a lot of power. However, the wireless
signal will be significantly weaker.
FastSave- This is the standard mode for power saving.
Disable – Power will not be saved, yet the wireless signal will
be better.
Tx Burst
Such a function can increase the data transmission rate within a
short time. Choose Enable to activate the function, otherwise,
choose Disable to deactivate the function.