User`s manual

S
S
t
t
a
a
t
t
u
u
s
s
This tab provides connection status and hardware information for the device. To view this tab,
simply click Status on the WLAN Monitor window.
Connection Status This displays the current status of the connection.
SSID This displays the SSID of the AP that your computer is connected
to.
BSSID This displays the MAC address for the current device.
Network Type This displays the mode (Infrastructure or Ad-Hoc) that you set for
connecting to the AP.
Frequency This displays the frequency that this wireless card is using.
Channel This displays the channel being used by this wireless card.
Data Encryption This displays the encryption type of the authentication mode being
used for this wireless card.
Speed This displays the current transferring rate for the link.
Authentication State This displays the encryption status for the connection.
Signal Strength The longer the signal strength red bar, the better the connection
will be. The graph is active only when you choose Access Point as
the network type.
MAC Address This displays the MAC address for the AP or the wireless router
that the station is connected to.
Regulatory Domain This displays the Regulatory Domain for different areas. For
example, it will display ETSI (CH1~CH13) for nations in Europe,
FCC (CH1~CH11) for USA, etc.
Radio Status This displays whether the wireless card is ON or OFF.