User`s manual

62
SAVE: Click SAVE to save your changes.
Note that you must enter the user name exactly as your ISP assigned it. If the assigned name is
in the form of user@domain where domain identifies a service name, enter it exactly as given.
When you are done making changes, click on SAVE to save your changes.
9. Maintenance
9.1 Administration
There is only one account that can access Web-Management interface-Administration.
Admin has read/write access privilege. In this web page, you can set new password for admin.
New Password: Type the new password in this field.
Confirm Password: Type the new password again in this field.
Note: If you ever forget the password to log in, you may press the RESET button up to 6
second to restore the factory default settings. The Factory Default Settings for User Name
& Password are admin & trendchip.