54 Wireless 4-Port ADSL2+ Modem Router Quick Installation Guide ．Q u a l i t y N e t w o r k s ．
Wireless ADSL2+ Router Installation Guide 1. Panel Illustration ....................................................................................... 2 1.1 Wireless ADSL2+ Router Front Panel Indicators and Descriptions ......2 1.2 Back Panel ..................................................................................................2 2. Package Contains ..................................................................................... 3 3. Hardware Installation ..................................
1. Panel Illustration 1.1 Wireless ADSL2+ Router Front Panel Indicators and Descriptions Place the Router in a location that permits an easy view of the LED indicators shown in the front panel. Descriptions of LED status PWR WLAN ADSL When an active power adapter is connected with router, this LED will light up. When WLAN card installed properly, this LED will be flashing. When transferring data, the LED will be steadily.
2. Package Contains Open the shipping carton and carefully remove all items. In addition to this quick installation guide, ascertain that you have: z One Wireless ADSL2+ Router z One telephone cable (RJ11) z One Ethernet cable (RJ45) z One CD z One power adapter 3. Hardware Installation This section discusses the cable connections you will need to make in order to use the router.
4. Wireless ADSL2+ Quick Setup Procedure 4.1 Quick Setup Step 1: Insert the provided CD into CD drive and the window below will be shown, and then click “Quick Setup” to configure the router. Step 2: Select the country when setup window appears.
Step 3: If your country is not on the list, please click “*” to next page and select “Other”. Step 4: After you select the country selection, the window below will appear, and then select the ISP.
Step 5: After complete ISP selection, the window below appears and then enter your account “User Name”, “Password”, and “Password Confirm”, then click “``” to next page. Step 6: Confirm router settings and then click “``” to next page.
Step 7: Please wait for a while for applying your setting. After the setting is applied, clicks “X” to exit the Setup program. Attention: After you complete all settings, please wait 3 seconds for router reboot automatically. 4.2 Quick Setup for “Other” Step 1: If your country is not on the list, please click “Other” to go to Router Setup Utility for the detail setting.
Step 2: After you click “Other”, then the windows below will appear and press “OK”. Step 3: Entry of the User Name & Password will be displayed. Enter the default login User Name & Password. The default login Name of the administrator is admin, and the default admin login password is admin.
Step 4: Please refer to User Manual for the detail settings. Steps to navigate the Web configuration from the Site Map are summarized below. ¾ Click on Interface Setup to configure Internet and LAN functions. ¾ Click on Advanced Setup to configure advanced features. ¾ Click on Access Management to manage Internet access options.
