User`s manual

Chapter 2. Installation and Basic Configuration

This chapter describes the procedures of installing the UOW2000 Series.

2.1 Before You Start

After unpacking the system, make sure the following items are present

and in good condition. Refer to below pictures for product image.

1. UOW2000 Series Outdoor Wireless Access Point/Client Bridge unit

2. 100~240VAC, 50~60Hz AC to 48V/0.375A DC switching adapter

3. Inline Power Injector (PoE) 48VDC, 0.375A

4. RJ-45 CAT-5 Ethernet cable 30 m

5. RJ-45 CAT-5 Cross-over Ethernet cable 1.8m

6. Grounding wire 1.8m

7. User manual CD-disc

8. Wall/mast mounting kit, including one (1) band clamp

9. Screws

10. 5dBi Oimi-type Antenna (for AP)

1. Unit 2. Adapter 3. PoE 4. 30m cable

(Optional)

5. 1.8m cable

(Optional)

6. Grounding wire 7. CD 8. Wall mount

9. Screws 10. Antenna(for

AP)