User`s manual

2. Once you have found the file to be used, click the Upload button

below to start the firmware upgrade process. This can take a

minute or more.

3. Wait for the Access Point to reboot. This can take another minute

or more.

4. Confirm updated firmware revision on status page.

Firmware Information

Here are displayed the version numbers of the firmware currently

installed in your Access Point and the most recent upgrade that is

available.

Firmware Upgrade

Note: Firmware upgrade cannot be performed from a wireless

device. To perform an upgrade, ensure that you are using a PC that

is connected to the Access Point by wire.

Note: Some firmware upgrades reset the configuration options to

the factory defaults. Before performing an upgrade, be sure to

save the current configuration from the Tools -> Admin screen.

Upload

Once you have a firmware update on your computer, use this

option to browse for the file and then upload the information into

the Access Point.