User`s manual

Chapter 1. Introduction
1.1 Introducing the UOW2000 Series
The UOW2000 Series is fully interoperable with IEEE 802.11a and/or
802.11b/g compliant Outdoor Wireless Last-mile product. The UOW2000
SERIES operates in AP mode or remote bridge mode, and connects to
UOW2000 SERIES AP/CB to construct point-to-point as well as
point-to-multipoint topologies, for maximum flexibility in configuring
building-to-building networks and WISP functions.
1.2 Product Features
¾ Outdoor enclosure in compliance with versatile industrial IP
（Ingress Protection） level covering IP67, IP66, IP55 and IP50
¾ RF transmit power 802.11b mode @ 11Mbps data rate
¾ RF transmit power 802.11g mode @ 54Mbps data rate
¾ Support 48VDC 0.375A Power-over-Ethernet（PoE）
¾ NAT/NAPT and Virtual Server Mapping support (Optional / RB
only)
¾ MIB-I support
¾ MAC address based access control
Hint: IP（Ingress Protection）
1.3 Package Contents
The product package contains the following items.
1. One (1) UOW2000 Series Outdoor Wireless Access Point / Client
Bridge unit
2. One (1) 100~240VAC, 50~60Hz AC to 48V/0.375A DC switching
adapter
3. One (1) 48VDC, 0.375A Inline Power Injector (PoE)
4. One (1) 30m RJ-45 CAT-5 Ethernet cable
5. One (1) 1.8m RJ-45 CAT-5 Cross Over Cable
6. One (1) 1.8m grounding wire
7. One (1) User manual CD-disc
8. One (1) wall/mast mounting kit
9. One (1) band clamp
4