User`s manual

Chapter 3. Network Topologies

This chapter describes several common types of installations

implemented by using the UOW2000 Series’s line of Outdoor Wireless

System. This is by no means intended to be an exhaustive list of all

possible configurations, but rather shows examples of some of the more

common implementations. The UOW2000 Series CB can be configured to

function as a Wireless Client Router or Bridge to a central access point

like the UOW2000 Series AP see Figure 3-1 below.

Figure 3-1

The UOW2000 Series CB performs in either router or bridge mode. In a

Point-to-Multipoint topology, all communication between network systems is done

through a centralized agent. Among the UOW2000 Series Outdoor Wireless Bridge

products, the centralized agent is Central Bridge (UOW2000 Series AP) and the

individual network notes may be Bridge (UOW2000 Series CB ).

To show the available Point-to-Multipoint topologies, the following examples are

provided.

Wireless Client Bridge-to-Central Wireless Bridge