User`s manual

ICR
1. Click OSD(Enter) to recall OSD Setup Menu.
2. Click the Up or Down button to select "ICRt" on menu.
3. Click Left or Right button to make selection: Auto -> In -> Out
z Auto: When light level is over 30Lux, IR cut filter switches to IN automatically to produce color image. When
light drops below 10 Lux, IR cut filter switches to OUT automatically to produce monochrome image. Under
monochrome mode, sensitivity is increased to 0.01 Lux and can be used with IR illuminators.
z Out: IR cut filter is OFF and always produce monochrome image.
z On: Always produce color images.
4. Click ESC button to exit menu, when finish or click Up or Down button to select next item
- 98 -