User`s manual

Another way to activate tracking mode is under configuration > A/V Settings > Tracking
Click on “Tracking On/Off” button to activate or deactivate tracking mode.
RET Mode
1. Click OSD(Enter) to recall OSD Setup Menu.
2. Click the Up or Down button to select "RET Mode" on menu.
3. Click Left or Right button to make selection: Off -> Home -> SEQ
Home: With tracking off, when the RET time is up, the device will move back to preset-point one.
SEQ: When RET time is up, the device will start auto-pan.
4. Click ESC button to exit menu when finished or click Up or Down button to select next item.
- 91 -