User`s manual

z IRF IN : IR Cut Filter is ON and always produce constant color image.
z IRF OUT : IR Cut Filter is OFF and always produce monochrome image.
z IRF AUTO : When light level is over 30 Lux, IR Cut Filter switches IN automatically to produce color image. When
light drops below 10 Lux, IR Cut Filter switches OUT automatically to produce monochrome image. Under
monochrome mode, sensitivity is increased to 0.01 Lux and can be used with IR illuminators.
IR SENSITIVITY Setting (IR SENSITIVITY)
Position the cursor beside IR SENSITIVITY, adjust the sensitivity for IR Cut In and IR Cut Out of IR Cut Filter under
auto mode by clicking the Left or Right button.
If setting the smaller value, only reaction when the light is very weak. On the other hand, IR Cut will be action.
Auto Focus Setting (AF MODE)
Position the cursor beside AF MODE and select AF or ONE SHOOT by clicking the
Left or Right button.
z AF : Continuous auto focus.
z ONE SHOOT : When ONE SHOOT AF is activated, Fast Dome will focus on t
object only once automatically under Auto Panning or manual Zoom IN / Zoom
OUT.
he
- 87 -