User`s manual

2. Position the cursor beside VINTP, click the Left or Right button to select the E-Zoom vertical interpolation
method.
3. Position the cursor beside RET, click OSD(Enter) to return to SPECIAL FUNCTION menu.
Note:
z Linear interpolation
Interpolation signals are created between original signals using liner approximation. It provides images with
normal appearance.
z Cubic interpolation
The ideal LPF's impulse response is approximated by a curve, which is folded into the original signal to create
an interpolation signal. It provides images with increased resolution compared to linear interpolation.
z B-Spling interpolation
Interpolation signals are created using a curve which is joined by a smooth polynomial expression. It provides
images with a greater sense of smoothness than linear interpolation.
z 0-Order hold interpolation
The original signal is held and used as an interpolation signal, when the magnification is increased, mosaic
impression may appeared on the image.
- 73 -