User`s manual

6 Advanced Settings for UNC7825-OW
You can use the Web-based user interface to configure the most of functions for the UNC7825-OW. Some advanced
functions can be set via an on-screen display (OSD) setup menu.
6.1 Call Out the OSD Setup Menu
In Configuration > A/V Settings > PTZ Settings page, click on OSD(Enter) to call out the SETUP MENU.
You can use the following buttons on the OSD Setup Menu:
z Up, Down, Left and Right buttons: Move the cursor on the menu, or change the setting.
z OSD(Enter): Confirm the selection.
z ESC: Close and quit the SETUP MENU when in the first page.
z To quit from the other menu, position the cursor beside RET on the bottom of each page and click OSD(Enter)
.
- 70 -