User`s manual

Manual Zoom Speeds Switch
After above steps were completed, the selected manual zoom speed is stored in the NDC. To use the selected manual
zoom speed under lens control, user has to click Lens Speed button before operation, otherwise manual zooming
speed will be "FAST" as default. To switch back to "FAST" manual zoom speed simply click Lens Speed button again.
Auto Focus & One Shot Focus Selection
1. Click OSD(Enter) to recall OSD Setup Menu.
2. Click the Up or Down button to select 20th item "Focus Set" on menu.
3. Click Left or Right button to make selection: Auto -> OneShot
4. Click ESC button to exit menu, when finish or click Up or Down button to select next item.
z After "Auto Focus" is selected, user has to click the arrow button beside “Auto Focus” to activate auto focus
function.
z After "One Shot" is selected, user has to click the arrow button beside “Auto Focus” to activate one shot auto
focus function.
When "One Shot Focus" is activated, the NDC will only auto "one shot" focus on object under Auto Panning or
Manual Zoom In/Zoom Out.
Manual Focus Speed Selection
1. Click OSD(Enter) to recall OSD Setup Menu.
2. Click the Up or Down button to select 19th item "Focus SPD" on menu.
3. Click Left or Right button to make selection: Fast -> Medium -> Slow
4. Click ESC button to exit menu, when finish or click Up or Down button to select next item.
- 68 -