User`s manual

Manual Iris Speed Selection
1. Click OSD(Enter) to recall OSD Setup Menu.
2. Click the Up or Down button to select 17th item "Iris SPD" on menu.
3. Click Left or Right button to make selection: Fast -> Medium
4. Click ESC button to exit menu, when finish or click Up or Down button to select next item.
Manual Iris Speeds Switch
After above steps were completed, the selected manual iris speed is stored in the NDC. To use the selected manual
iris speed under lens control, user has to click Lens Speed button before operation, otherwise manual iris speed will be
"MEDIUM" as default. To switch back to "MEDIUM" manual iris speed simply click Lens Speed button again.
Manual Zoom Lens Control Speed Selection
1. Click OSD(Enter) to recall OSD Setup Menu.
2. Click the Up or Down button to select 18th item "Zoom SPD" on menu.
3. Click Left or Right button to make selection: Fast -> Medium -> Slow
z FAST = Tele - Wide : 3.5 seconds
z MEDIUM = Tele - Wide : 6 seconds
z SLOW = Tele - Wide : 52 seconds
4. Click ESC button to exit menu, when finish or click Up or Down button to select next item.
- 67 -