User`s manual

4.8 Configuration of Event
– General
Trigger
System provides “GPIN” and “Motion Detection” for event detection.
z GPIN & GPIO Input Status : They are auto detected and display the status.
z Motion Detection : Make a checkmark on this option to start detect the motion area. See next segment to set the
motion area.
z Track (On/ Off) : Turning on or off the tracking function
Action
Make a checkmark on either FTP Image, Mail Image, or on all of them, to determine what action should be taken
when the event is triggered.
z FTP Image : Send the image to the configured FTP site when event is triggered. Click on the link to set the FTP
server.
z Mail Image: Send the image to the configured mail address when event is triggered. Click on the link to set the
Email addresses.
z Alert Message Status : They are auto detected to display the status, the signal can be used with the recording
application software on PC.
Apply : Click this button to save the changes made.
- 57 -