User`s manual

modes.
z ICR ON (ICR IN): IR Cut Filter is ON and always produce constant color image.
z ICR OFF (ICR OUT): IR Cut Filter is OFF and always produce monochrome image.
z ICR AUTO
♦ UNC7825-O/ UNC7825-OT: When light drops below 3 Lux, switch from color to monochrome automatically.
♦ UNC7825-OW : When light level is over 30 Lux, IR Cut Filter switches IN automatically to produce color
image. When light drops below 10 Lux, IR Cut Filter switches OUT automatically to produce monochrome
image. Under monochrome mode, sensitivity is increased to 0.01 Lux and can be used with IR illuminators.
– Changing the Lens Speed between Default and Manual Setting
Click on Lens Speed to switch the Lens speed between default speed and the manually setup speed.
– Setting More Functions for UNC7825(O/OW/OT)
Click OSD(Enter) will call out a SETUP MENU, it allows user to configure more functions for UNC7825 (O/OW).
To close and quit the SETUP MENU, click ESC button.
Refer to “5. Advanced Settings for UNC7825-O”, “6. Advanced Settings for UNC7825-OW” and “7. Advance Settings
for UNC7825-OT”for the details.
- 47 -