User`s manual

4.3 Setting External Sources
z Video Select : Select the channel this external source will be displayed.
z IP Address : Enter a valid IP address from an IP Camera or Video Server.
z Http Port : Enter the port number used for the IP address for network connection.
z Video Type : Select MJPEG or MPEG4. The type must match the external source provided.
z Rotation : Rotation degrees run from 0 to 270 degrees for a permanent digital position.
♦ 0: 0 degree
♦ 1: 90 degrees
♦ 2: 180 degrees
♦ 3: 270 degrees
z Video Channel : If the external source is a camera connected to a Video Server, select the channel of the Video
Server.
z Username/Password : Enter the respective Username and Password if applicable. If no user has been set for the
device, the default value should be root and pass respectively.
z RTSP Port : Enter a RTSP Port used for streaming in case the external source is a MPEG4 device.
z PTZ Model : Choose a PTZ model.
z Name : Enter a name for the device.
z Product Type : Select from MJPEG or MPEG4 Video Servers or IP Cameras. Please refer to the original
document of the device for a better description.
z Test : Before submitting the information, click on this button to validate the video connection and the live video will
be displayed if the settings are correct.
z Apply : Click on this button to save the changes made.
- 42 -