User`s manual

– Manually Set Up Additional Camera
This feature allows the user to temporary set an additional video source for the remote device.
Click on [Camera Manual Setting] button on the Remote window, and configure the following settings:
Note: This camera will be removed after leaving or closing the Web page.
z IP address : Enter a valid IP address from an IP Camera or Video Server.
z Http Port : Enter the port number used for the IP address for network connection.
z Username/Password : Enter the respective Username
and Password if applicable. If no user has been set for
the device, the default value should be root and pass
respectively.
z Video Channel : If the selected camera is connected
to a Video Server, select the channel of the Video
Server.
z Video Type : Select MJPEG or MPEG4. The type must
match the external source provided.
z Rotation : Rotate the video for view. Rotation degrees
run from 0 to 270 degrees.
♦ 0: 0 degree
♦ 1: 90 degrees
♦ 2: 180 degrees
♦ 3: 270 degrees
z RTSP Port : Enter a RTSP Port used for streaming in case the external source is a MPEG4 device.
z Name : Enter a name for the device.
z PTZ Model : Enter a PTZ model.
z Product Type : Select from MJPEG, MPEG4 Video Servers or IP Cameras. Please refer to the original document
of the device for a better description.
z Test : Before submitting the information, click on this button to validate the video connection and the live video will
be displayed if the settings are correct.
z Apply : Click this button to save the changes made.
z Return : Click this button returns to the live video of the remote device.
- 36 -