User`s manual

z Focus + : The target will become nearer.
z Focus - : The target will become farther.
z Speed : Click on the UP/Down arrows and select the speed of the Pan and Tilt movements. Values run from 1 to 7.
Being 1 the slowest and 7 the fastest
z Manual Pan/Tilt : Click on the 4-directions button to move the camera to that direction. Click on the rectangle
button to stop the movement.
z Preset Point : Click on the number buttons to select a preset position for quick view.
– Setting for Video Record
You can change the settings for recording by clicking on [Setting] button in Location window.
z Reserve Space : Set the total file space for the recording.
z Max File Length : Set the file space that a single file will be
using.
z Save File Path : Indicate which folder should the file be saved
to.
z Location File Name : Input the name for the file that recorded
from the location device.
z Remote File Name : Input the name for the file that recorded
from the remote device.
z Cycle Recording : This feature determine if the old space
should be used or not for the recording. Make a check mark
in order to enable this function. If you enable this feature, old files will be deleted
z Sync to TimeStamp : This feature enables the file to be saved according to the time. When the video file is
displayed, the video will make a match between the frames and the time.
z Apply : Click this button to save the changes made.
z Return : Click this button returns to the live video of the location device.
z Record/Stop : Click [Record] button to start recording. Click [Stop] button to stop recording.
– Select the Remote Device
Select the camera from the pull-down list, the video of
the remote device will be displayed.
There are 4 cameras can be selected as the Remote
device. The first three are set up in the Configuration
page; the last one can be set up by clicking [Camera
Manual Setting] button.
- 35 -