User`s manual

9 Specifications
System
Model UNC7825-O UNC7825-OW
CPU 32-Bit RISC Processor
ROM 4MB Flash ROM
RAM 32MB SDRAM
Watchdog Chip to monitor system voltage tolerance and abnormal program execution
Image Compression MPEG-4 Simple Profile (SP), JPEG, MJPEG
Resolution Full D1 (4SIF): NTSC = 720 x 480; PAL = 720 x 576
SIF: NTSC = 352 x 240; PAL = 352 x 288
QSIF: NTSC = 176 x 112; PAL = 176 x 144
Bit Rate 16K ~ 4M bits/sec (CBR/VBR configurable)
High quality VBR settings for MJPEG can reach to 10Mbps
Video Adjustment Brightness, Contrast, Hue, Saturation, Frame rate, Bit rate (Constant Bit Rate (CBR), Variable
Bit Rate (VBR) w/ quality levels), Group of Pictures (GOP) size, Frame Sequence (I-Frame,
I-Frame/P-Frame), Interlaced/Progressive Scanning
Video Performance Up to 30(NTSC) / 25(PAL) frames per second
Network Interface 10/100 Base-T Ethernet
Protocols TCP (UDP)/IP, ICMP, HTTP, TFTP, FTP, Telnet, SMTP, DHCP, NTP, DNS, DDNS, RTSP,
RTP/TCP(UDP)
Recording Directly from Web UI while viewing the live video stream
Recording Software: Free 16-channel surveillance and configuration software
Installation Software IP Installer (Win32 Application)
Firmware Upgrade Local or remote software upgradeable using FTP; Customized Web UI upgradeable via FTP and
Telnet
Client PC Requirement Computer: Pentium 4 2.0GHz or equivalent, 512MB RAM
Operating System: Microsoft Windows 98se/Me/2000/XP
Web Browser: Microsoft Internet Explorer 5.x or above
Software Required: Microsoft DirectX 9.0c, Macromedia Flash 6, MPEG-4 Software Codec
Security Multi-tiered access control for configuration
Connectors Network: 1x RJ-45 connector for Ethernet
Video: 1x BNC video output connector, CVBS 1.0Vpp/75Ω
Audio: 1x line-in input 3.5mm jack
Power: 1x 12Vdc connector
Indicators: 2x LEDs to indicate network and power/system status
Terminal Block: 6x fully opto-isolated sensor inputs
1x relay output
2x RS-485 COM ports (1 in, 1 out) for external keyboards or daisy-chain
(supports up to 64 serial-linked cameras)
- 113 -