User`s manual

good to connect the Wireless LAN Access Point.
9 IP Subnet Mask: 255.255.255.0
5. Click OK to complete the IP parameters setting.
For OS of Microsoft Windows 7:
1. Click the Start button , then click Control Panel. The Control Panel window will
appear.
2. Move mouse and click the right button on Network and Internet item. The Network
and Internet window will appear. Click Change adapter settings in left menu then
adapters window shown and double click Local Area Connection icon
3. In Local Area Connection Properties window, Choose Networking tab, move mouse
and click Internet Protocol Version 4 (TCP/IPv4), then click Properties button.
4. Move mouse and click General tab, Select Specify an IP address and type in values
as following example.
9 IP Address: 192.168.1.1, any IP address within 192.168.1.1 to 192.168.1.253 is
good to connect the Wireless LAN Access Point.
9 IP Subnet Mask: 255.255.255.0
Click OK to complete the IP parameters setting.
3.2 Connect to the UGL2430-RTB
Open a WEB browser, i.e. Microsoft Internet Explore 6.1 SP1 or above, then enter
192.168.1.254 on the URL to connect the UGL2430-RTB.
3.3 Management and configuration on the UGL2430-RTB
3.3.1 Status
This page shows the current status and some basic settings of the device, includes
system, wireless, Ethernet LAN and WAN configuration information.