User guide

DTIM Interval: This value indicates the interval of the Delivery Traffic Indication

Message (DTIM). A DTIM field is a countdown field informing clients of the next

window for listening to broadcast and multicast messages. When the access point

has buffered broadcast or multicast messages for associated clients, it sends the

next DTIM with a DTIM interval value. Access point clients hear the beacons and

awaken to receive the broadcast and multicast messages.

SSID Broadcast: While SSID Broadcast is enabled, all wireless clients will be able

to communicate with the access point. For secure purpose, user may want to disable

SSID broadcast to allow only those wireless clients with the AP SSID to

communicate with the access point.

TX Rates: Select one of the wireless communications transfer rates, measured in

megabytes per second, based upon the speed of wireless adapters connected to the

WLAN.

CTS mode:

None: Disable CTS function.

Always: Regardless of wireless environment (11b or 11g), platform will always

transfer 11b packet.

Auto: AP soon detected the wireless environment and decided the transmission

packet, either 11b or 11g

11g Only Mode: To setting the AP operation mode for 802.11g only or

802.11b/802.11g mix mode.

Super G Mode: From the drop list, if you like to use Super-G

to enhance the

speed, there are three options on Super-G

mode: Super G without turbo; Super

G with Dynamic turbo and Super G with Static turbo. The turbo mode indicates

the combination of two channels to enhance the throughput. Super G without turbo

indicates that it is on Super G mode without the channel’s combination. Dynamic

turbo is able to automatically detect if any ‘Super-G

based’ product is available.

If no, the connection is via ‘normal’ G. Static turbo means it will not go back to

‘normal’ G once it starts.

Antenna transmit power: Adjust the power of the antenna transmission by

selecting from the drop down list for full, half (-3dB), quarter (-6dB), eighth (-9dB)

and min.

Aging Interval: To limited STA connect timing.