User guide

Repeater mode

Configure the AP to Repeater mode; the AP will be a wireless LAN repeater that

will be extended the WLAN coverage range.

Note: The SSID setting must same as remote AP.

Remote AP SSID: Service Set Identifier, which is a unique name shared among

all clients and nodes in a wireless network. The SSID must be identical for each

clients and nodes in the wireless network.

Site Survey: This button allows user to enable the Site Survey function to scan

for the available wireless network (wireless clients and Access Points) and

establish wireless communications with one. Selected one of them in list to

establish communications and click “Connect” button.

Beacon Interval: To set the period of time in milliseconds that AP sends out a

beacon. Default is 100 milliseconds.

RTS Threshold: RTS stands for “Request to Send”. This parameter controls what

size data packet the low level RF protocol issues to an RTS packet. The default is

2346.

Fragmentation Threshold: To set the number of bytes used for the fragmentation

boundary for directed messages. Default is 2346 bytes.