User`s manual

Step 2

Connect the monitor to the USB KVM Switch. Using the attached cable, or the one included

with your monitor, connect it to the HDDB-15 female port on the back of the USB KVM unit

labeled with the monitor symbol at the CONSOLE port connector.

Note: For Windows ME/XP/NT/2000 user, please skip step 3 and go to Step 3-1

directly.

Step 3

For Windows 98/98SE/DOS user only:

Connect PS/2 keyboard to your PC PS/2 keyboard port directly and do not connect PS/2

mouse to your PC

Step 3-1

For Windows ME/XP/NT/2000 user only:

Connect USB keyboard to your PC USB keyboard port directly and do not connect PS/2

mouse to your PC

Step 4

Please connect the USB mouse to the USB KVM Switch’s USB mouse port.

Step 5

Now the PC connections will be made with the monitor (VGA) connections first. Connect a

2-in-one cable (15-pin HDDB Male to 15-pin HDDB Male and USB type A) with the VGA

male side to both of the PC and the rear panel of the USB KVM switch to the connector

labeled VGA.