User`s manual

16
Once you use keyboard or mouse to move the highlight bar cursor to “ PORTNAME “ to press
[Enter] key or double clicks “ PORTNAME “ to activate “ PORTNAME ” window. The other items
like “ LANGUAGE ”, “ TIMEVIEW “, “ SECURITY “, “ FINDPORT “, “ PASSWORD “, and
“ CONSOLE “ need be activated in the same way.
PORTNAME OSD Window :
a. The 1
ST
line bar is Bank no.
b. The 2
nd
block is your PC
system name list. You will find
the system number list from 01
to 04 (if the current box is 4 port)
or from 01 to 08 (if the current
box no. is 8 port) or from 01 to 16
(if the current box no. is 16 port).
You can define your PC name in
maximum 10 characters. The
factory default of 16 port KVM
switch PC name is from
“SYSTEM 01”, “SYSTEM 02” ,…,
“SYSTEM 16” and 8 port KVM
switch is from “SYSTEM 01”,
“SYSTEM 02”,…, “SYSTEM 08”.
Besides, the sun symbol “☼
“near to the PC name represents
the PC system is powered on.
Using the Up key “© “ or the Down key “ª“ to select port for destination PC name. After you
have selected the PC port already, you can either press the ENTER Key, or twice clicking the left
button of mouse to switch the PC port immediately. You can use mouse to click the triangle button,
which located at the right up side or the right down side, to scroll the menu. If there are more items
07 CONSOLE
☼ SYSTEM 02
BANK 1
PORTNAME ?X
01 SYSTEM 01
03
SYSTEM 03
04
SYSTEM 04
05
SYSTEM 05
06
SYSTEM 06
07
SYSTEM 07
02

08
SYSTEM 08
☼SYSTEM 09
MAIN CONTROLS ?X
ENTER A CHOICE :
01 LANGUAGE
02 PORTNAME
03 TIMEVIEW
04 SECURITY
05 FINDPORT
06 PASSWORD

09