Instruction manual

PVID
When the VLAN-enabled switch receives a tagged packet, the packet will be
sent to the port’s default VLAN according to the PVID (port VLAN ID) of the
receiving port.
Items Functions
Port Port Number 1~8
Egress Select “tagged” in the drop list to enable the PVID
checking and tag inserting of one port, and select
“untagged” to cancel.
For example, if an Egress-tagged port receives an
untagged frame, it will be transmitted as a PVID tagged
frame. For the detail tagging status, please refer to the
following table.
Untagged Tagged
Packet
Frames In
Packet
Frames Out
Packet Frames
In
Packet
Frames Out
Untagged Untagged Untagged Tagged (PVID)
Tagged Untagged Tagged (VID) Tagged (VID)
Pri-tagged Untagged Pri-tagged Tagged (PVID)
PVID Port VLAN ID(1~4094)
Only
tagged
Enable: block all un-tagged packets from accessing this
port.
Disable: All packets are allowed to access this port.
15